5 onboard devices configuration, High definition audio [enabled, Marvell gigabit lan [enabled – Asus P5K-VM User Manual
Page 77: Via firewire1394 [enabled, J-micron pata controller [enabled, Serial port1 address [3f8/irq4, Parallel port address [378, Allows you to enable or disable the jmicron
ASUS P5K-VM
2-25
2.4.5
OnBoard Devices Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
Onboard Device Configuraiton
High Definition Audio
[Enabled]
Front Panel Type
[HD Audio]
Marvell GigaBit LAN
[Enabled]
LAN Boot ROM
[Disabled]
VIA Firewire 1394
[Enabled]
J-Micron PATA Controller
[Enabled]
Serial Port1 Address
[3F8/IRQ4]
Parallel Port Address
[378]
Parallel Port Mode
[ECP]
ECP Mode DMA Channel
[DMA3]
Parallel Port IRQ
[IRQ7]
Enable or Disable
High Definition Audio
Controller
BIOS SETUP UTILITY
Advanced
High Definition Audio [Enabled]
Allows you to enable or disable the High Definition Audio. The following item
appears only when you enable this item.
Configuration options: [Enabled] [Disabled]
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy
AC’97 or high-definition audio depending on the audio standard that the front
panel audio module supports. Configuration options: [AC97] [HD Audio]
Marvell GigaBit LAN [Enabled]
Configuration options: [Enabled] [Disabled]
LAN Boot ROM [Disabled]
This item appears only when you enable the previous item.
Configuration options: [Disabled] [Enabled]
VIA Firewire1394 [Enabled]
Allows you to disable or enable the onboard 1394 device support.
Configuration options: [Enabled] [Disabled]
J-Micron PATA Controller [Enabled]
Allows you to enable or disable the JMicron
®
PATA controller.
Configuration options: [Enabled] [Disabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]