AEG DE4003000M - Manual (Page 25)

10.5 Replacing the oven lamp
1. The oven lamp is on the left side of
the oven cavity. Remove the left
shelf rail for access to the lamp.
2. Use a narrow, blunt object (e.g. a
teaspoon) to remove the glass cov-
er. Clean the glass cover.
3. If necessary, replace the oven lamp
with an applicable 300 °C heat-re-
sistant oven lamp.
Use the same oven lamp type.
4. Install the glass cover.
5. Install the left shelf rail.
11. WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
Problem Possible cause Solution
The oven does not heat
up The appliance is switch-
ed off Switch on the appliance
The oven does not heat
up The clock is not set Set the clock. Refer to
"Setting the clock"
The oven does not heat
up The necessary settings
are not set Make sure, the settings
are correct
The oven does not heat
up The automatic cut-out is
switched on Refer to "Automatic cut-
out"
The oven does not heat
up The fuse is released Make sure, if the fuse is
the cause for the mal-
function. If the fuse re-
leases again and again,
refer to an authorized
electrician
The oven lamp does not
operate The oven lamp is defec-
tive Replace the oven lamp
The display shows an er-
ror code that is not in
this list There is an electronic
fault • Switch off the appli-
ance with the house
fuse or the safety
switch in the fuse box
and switch it on again
• If the display shows
the error code again,
refer to the Customer
Care Department
ENGLISH
25