AEG L99695HWD - Manual (Page 5)

with a hinge on the opposite side in
such a way that a full opening of the
door is restricted.
• Fabric softener or equivalent products
must be used as specified by the fabric
softener manufacturer.
• Obey the safety instructions on the de-
tergent packaging to prevent burns to
eyes, mouth and throat.
• Plastic items are not heat resistant.
– If you use a detergent ball, remove it
before you set the drying pro-
gramme.
– Do not use a detergent ball when
you set a non-stop programme.
WARNING!
Risk of explosion or fire.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance. if
it is not possible to avoid it, fully rinse
with extra water items cleaned with
flammable products.
• To prevent from the risk of self combus-
tion do not stop the drying programme
before the end of the drying cycle un-
less all items are quickly removed and
spread out so that the heat is dissipa-
ted.
WARNING!
Risk of burns!
• When you interrupt the drying pro-
gramme, the laundry and the drum may
be hot. Remove the laundry carefully.
• Do not touch the glass of the door
while a programme operates. The glass
can be hot.
CARE AND CLEANING
WARNING!
Risk of injury or damage to the ap-
pliance.
• Before maintenance, deactivate the ap-
pliance and disconnect the mains plug
from the mains socket.
• Do not use water spray and steam to
clean the appliance.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal ob-
jects.
INSTALLATION
• Remove all the packaging.
• Do not install or use a damaged appli-
ance.
• Do not install or use the appliance
where the temperature is less than 0 °C.
• Obey the installation instruction sup-
plied with the appliance.
• Make sure that the floor where you in-
stall the appliance is flat, stable, heat
resistant and clean.
• Do not install the appliance where the
appliance door can not be fully
opened.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Make sure that there is air circulation
between the appliance and the floor.
• Adjust the feet to have the necessary
space between the appliance and the
carpet.
Water connection
• Make sure not to cause damage to the
water hoses.
• Use only new hoses to connect the ap-
pliance to the water supply. Do not use
old hoses again.
• Before you connect the appliance to
new pipes or pipes not used for a long
time, let the water flow until it is clean.
• The first time you use the appliance,
make sure that there is no leakage.
Electrical connection
• Make sure that the appliance is earth-
ed.
• Make sure that the electrical informa-
tion on the rating plate agrees with the
power supply.
• Always use a correctly installed shock-
proof socket.
• Do not use multiple plugs and exten-
sion cables. There is a risk of fire.
• Do not replace or change the mains ca-
ble. Contact the service centre.
ENGLISH
5