Anritsu S251B User Manual
Page 75
Step 6. Choose Port Settings, then change to the following settings if necessary.
Baud Rate:
9600
Data Bits:
8
Parity:
None
Stop Bits:
1
Flow Control:
None
Step 7. Choose
Resource
and verify the COM Port Base Address and IRQ. Click
OK
when done.
Step 8. Click
OK
again to close the System Properties window.
Note:
If you changed the COM Port Base Address and/or IRQ, you will need to restart
Windows.
5-2
Chapter 5 Software Tools Program
Figure 5-1.
Windows 95/98/NT COM Port Setting Dialog Boxes