Anritsu S251B - Manual (Page 74)

Chapter 5
Software Tools
Program
Description
The Site Master Software Tools program provides the means for transferring the measured
trace, along with any applied markers and/or a limit, to the screen of an MS-DOS based
personal computer (PC) running Windows 95/98/NT.
Requirements
The Site Master Software Tools program is a standard Windows program and will run on
any computer that will run Windows 95/98/NT. Typically, this means having a PC with the
following characteristics:
· Pentium microprocessor (100 MHz or better, recommended)
· Microsoft Windows 95/98/NT
· 32 MBytes of memory, minimum
· Approximately 15 MBytes of available hard drive space
Communication Port Setting
The Site Master Software Tools communicates with the Site Master through a standard
COM port on the PC. It is important that your Windows COM port settings conform to the
actual hardware settings. Since various add-in devices such as sound cards, modems, and
network cards use IRQ (Interrupts), it is possible that your computer has non-standard
COM port settings. Please consult your computer vendor for COM port address and IRQ in-
formation.
Changing COM Port Settings–Windows 95/98/NT
Step 1. Open the Windows Control Panel.
Step 2. Double click on the SYSTEM icon. The System Properties window appears.
Step 3. Select Device Manager . The Device List appears.
Step 4. Double click on the item Ports (COM & LPT) in the device list.
Step 5. Double click on the communications port you want to set. The Communications
Port Properties window appears.
NOTE:
If Windows doesn't show any available COM Ports, consult your computer
manufacturer.
5-1
5