8 energy saving, Clock functions, 1 clock functions table – AEG BY9314001M User Manual
Page 13: 2 count up timer
6.8 Energy saving
The appliance contains features which
help you save energy during everyday
cooking:
• Residual heat
– When an oven function or
programme operates, the heating
elements are deactivated 10%
earlier (the lamp and fan continue
to operate). For this feature to
operate, the cooking time must
be longer than 30 minutes or you
must use the clock functions
(Duration, End, Time delay). This
feature does not operate with grill
functions.
– When the appliance is off, you
can use the heat to keep the food
warm. The clock / residual heat
display shows the remaining
temperature, and the bars show
the temperature as it decreases.
• Cooking with the lamp off - Touch
to deactivate the lamp during
cooking.
• Eco functions - refer to "Oven
functions".
• When you use the Moist Fan Baking
function, the lamp deactivates after 30
seconds. The lamp activates again
when you touch or when you open
the appliance door.
• When you use the ECO functions, the
lamp deactivates. The lamp activates
again when you touch or when you
open the appliance door.
• Deactivating the display - If
necessary, you can fully deactivate the
display. Touch and
at the same
time until the display goes out. This
step also activates the appliance.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function
Application
COUNT UP TIMER
To set the count up, which shows how long the appli-
ance operates. This function has no effect on the opera-
tion of the appliance.
TIME OF DAY
To show the time of day. To change the time of day, re-
fer to "Setting the time".
DURATION
To set how long the appliance operates.
END
To set when the appliance deactivates. You can use Du-
ration and End at the same time (Time delay) if you want
the appliance to activate and deactivate automatically
later.
SET+GO
To start the appliance with necessary settings with only
one touch of the sensor field any time later.
7.2 Count Up Timer
The Count Up Timer is not
activated if Duration and End
are set.
The Count Up Timer starts to count when
the appliance starts to heat.
1. To reset the Count Up Timer, touch
again and again until flashes in
the display.
ENGLISH
13