ATEN ATEN MasterView CS-1764 - Manual (Page 29)

4. Hotkey Operation
19
Keyboard Operating Platform
The CS-1762 / CS-1764’s default port configuration is for a PC compatible
keyboard operating platform. If your console uses a PC compatible keyboard
and you have a Mac attached to a port, for example, you can change the port’s
keyboard operating platform configuration so that the PC compatible keyboard
emulates the Mac keyboard. The procedure is as follows:
1. Bring the KVM focus to the port you want to set.
2. Invoke HSM (see page 17)
3. Press and release the appropriate Function key (see table below). After
completing this procedure, you automatically exit HSM.
Function Key Operation
[F2] Enables Mac keyboard emulation, see Mac Keyboard
Emulation, page 23 for details.
[F3] Enables Sun keyboard emulation, see Sun Keyboard
Emulation, page 24 details.
[F10] Disables keyboard emulation. Key presses are passed
straight through. When your console uses a Mac
keyboard to access a Mac attached to a port, for
example.
cs1762.book Page 19 Friday, February 17, 2006 10:21 AM