AEG Eclipse 10 - Manual (Page 13)

UK
8.14 Transfer an External Call to another Handset
tDuring the call, press to put the external call on hold.
>Intercom is established immediately if there are only 2 registered handsets.
>If there are more than 2 registered handsets, the handset numbers which are available for intercom
will be displayed.
tPress the handset number you wish to call or press to call all handsets.
Note: If there is no answer from the called handset, or you wish to cancel the intercom call before it is
answered, press
to return to the external call.
tPress on the called handset to answer the internal call, where both internal callers can talk.
tPress on the originating handset to transfer the external call to the called handset.
>The external call is transferred.
9. DIRECT ACCESS MEMORY
In addition to the phonebook memory, there are 2 direct access memories (Keys 1 & 2) on the handset. A
long press on the keys in standby mode will automatically dial the stored phone number.
9.1 Add Direct Access Memory
tFrom the home screen, press .
tPress to “PHONEBOOK” and then press to select.
tPress to “DIRECT MEM.” and then press to select.
tPress to “KEY 1” or “KEY 2” and then press to select.
>The stored name is displayed, or “NO NUMBER” if it is empty.
tPress to enter the “DIRECT MEM.” menu to add/edit the name or number.
tPress again to select “EDIT NUMBER”.
>The display shows the currently stored name or just “ENTER NAME” if it is empty.
tEdit or enter the name of your contact and press .
If you make a mistake, press to delete the last character entered.
>The display shows the currently stored number or just “ENTER NUMBER” if it is empty.
tEdit or enter the number of your contact and press .
If you make a mistake, press to delete the last digit entered.
>A confirmation tone is played.
tPress to return to standby mode.
9.2 Delete Direct Access Memory
tFrom the home screen, press .
tPress to “PHONEBOOK” and then press to select.
tPress to “DIRECT MEM.” and then press to select.
tPress to “KEY 1” or “KEY 2” and then press to select.
>“NO NUMBER” is displayed if it is empty. Otherwise, the stored name is displayed.
tPress to enter the menu options.
tPress to “DELETE” and then press to select.
>“CONFIRM?” is displayed.
tPress again to confirm.
>A confirmation tone is played.
tPress to return to standby mode.