AEG MBS 30 Turbo - Manual (Page 25)

19
GB
English
warning! read all safety warnings and all
instructions, including those given in the accompanying
brochure.
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
Safety inStructionS
wear ear protectors. Exposure to noise can cause hearing loss.
The dust produced when using this tool may be harmful to health. Do
not inhale the dust. Use a dust absorption system and wear a suitable
dust protection mask. Remove deposited dust thoroughly, e.g. with
a vacuum cleaner.
Appliances used at many diff erent locations including open air should
be connected via a residual current device (FI, RCD, PRCD) of 30mA
or less.
Before doing any work on the machine, pull the plug out of the
socket.
Only plug-in when machine is switched off .
Do not use saw blades not corresponding to the key data given in
these instructions for use.
Keep mains lead clear from working range of the machine. Always
lead the cable away behind you.
Before use check machine, cable, and plug for any damages or
material fatigue. Repairs should only be carried out by authorised
Service Agents.
Do not fi x the on/off switch in the „on“ position when using the saw
hanheld.
Please do not use abrasion disks in this machine!
technical data
fiber cement Saw
MbS 30 turbo
Production code 4103 96 01...
4118 21 01...
... 000001-999999
Rated input 1010 W
Rated speed 11000 min -1
Saw blade dia. x hole dia 127 x 20 mm
Diamond cutting wheel-ø x borehole-ø 125 x 22,2 mm
Diamond cutting wheel thickness 2,2 mm
Max. Cutting depth at 90° 32 mm
Max. Cutting depth at 45° 28 mm
Weight according EPTA-Procedure 01/2003 3,3 kg
noise/Vibration information
Measured values determined according to EN 60745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (K=3dB(A))
Sound power level (K=3dB(A))
wear ear protectors!
93,5 dB(A)
104,5 dB(A)
Total vibration values (vector sum in the three axes) determined according to EN 60745.
Vibration emission value a
h
Sawing of wood :
Uncertainty K=
Cutting of stone :
Uncertainty K=
3,7 m/s 2
1,5 m/s 2
4,5 m/s 2
1,5 m/s 2
warning
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for diff erent applications, with
diff erent accessories or poorly maintained, the vibration emission may diff er. This may signifi cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running
but not actually doing the job. This may signifi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eff ects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
425_201_MBS30turbo_3-1.indd 19 17.06.13 09:12