Xerox WorkCentre M24-3958 - Manual

Fig. 1-2
Select
Port Status .
Fig. 1-3
Place a checkmark in the
Enable box next to Salutation . Select Apply
New Settings .
If a checkmark already appears in the Enable box next to Salutation
skip the remaining steps in this pamphlet and continue to Retrieving
Scanned Documents Using Scan Driver Part 2 of 2.
Fig. 1-4
Enter the Administrator Name and Password. Click
OK . (See
Machine Administrator User Guide for default password.)
Note: This screen might not appear if the Administrator Name and
Password have already been entered.
Fig. 1-5
The "Settings have been changed." confirmation screen appears. Click
Reboot .
Fig. 1-6
Click
OK . (The WorkCentre M24 will take approximately 5 minutes to
reboot.)
Fig. 1-1
Open an Internet browser, in the
Address field enter the IP address of
WorkCentre M24 and press Enter . On the Internet Services screen
click Properties .
Retrieving Scanned Documents Using Scan Driver - 1 of 4