Moving the system within the office – Xerox WorkCentre C2424-5986 User Manual
Page 52
Moving and Repacking the System
WorkCentre® C2424 Copier-Printer
7-52
3.
Wait for the system to complete the cool-down cycle. The fan runs until the ink solidifies.
4.
After the fan stops running and the system shuts down, unplug the system.
Caution
Never move the system if you receive a
Power Down Error-Head not Parked
message at the system’s control panel. This message means the system is not ready to be
moved. If the printhead is not locked, the system can be damaged during shipment. For
more information, go to the Support web site at
.
Moving the System Within the Office
1.
Run the shut-down procedure so the ink solidifies. See page 7-51.
2.
Close the system’s door and covers.
3.
Always use two people to lift the system. Each person should have:
■
One hand grasp the hand hold on the side of the system.
■
The other hand grasp the hand hold on the back of the system as shown.
Caution
If the system has optional trays 3 or 4, lift the system off the trays.
Caution
If you turn off the system but do not select
Shutdown for
Moving System
, the fan does not run, so you must wait
longer for the ink to solidify. Wait at least 30 minutes for
the system to cool completely before moving or packing it.
30
0
2424-109
42 kg
93 lbs.