Changing intelligent ready mode – Xerox WorkCentre C2424-5979 User Manual
Page 16
System Settings
WorkCentre® C2424 Copier-Printer
1-16
3.
Select
System Controls
, then press the Enter button.
4.
Select
Power Saver Timeout
, then press the Enter button.
5.
Press the Down Arrow or Up Arrow button to scroll to a selected Power Saver timeout
value. Select a larger value if you want to extend the length of time before the system goes
into Power Saver mode.
6.
Press the Enter button.
Using CentreWare IS
1.
Launch your web browser.
2.
Enter your system’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3.
Select Properties.
4.
Click the General folder on the left sidebar, then click Warmup.
5.
Select a value from the Power Saver Timeout drop-down list to change the setting.
6.
Click Save Changes at the bottom of the page.
Changing Intelligent Ready Mode
Intelligent Ready mode is an automated system that:
■
Monitors the system’s usage.
■
Warms up the system when you are most likely to need it based on past usage patterns.
To turn on/off Intelligent Ready mode, use either:
■
The control panel
■
CenterWare IS
Using the Control Panel
To turn Intelligent Ready mode on/off:
1.
On the control panel, press the System Setup button.
2.
In the menu, select
General Setup
, then press the Enter button.
3.
Select
System Controls
, then press the Enter button.
4.
Select
Intelligent Ready
.
5.
Select
On
or
Off
, then press the Enter button.