Konica Minolta magicolor 7450II - Manual (Page 313)

Configuring the Printer 293
Speed Specifies the operating mode and speed for Ethernet.
Choices: Auto, 10Base-T(Half), 10Base-T(Full),
100Base-TX(Half), 100Base-TX(Full),
1000Base-T(Full)
Default: Auto
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET -
SPEED/DUPLEX
Auto IP Specifies the automatic assigning method for the printer
IP address.
Choices: DHCP/BOOTP
Default: Checked
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/
IP - DHCP/BOOTP
IP Address* Sets the printer’s IP address.
Range: 0–255 for each xxx triplet
Default: 0.0.0.0
"
If the specified IP address is outside of the
allowable range, the value is not changed, even
after the Apply button is clicked. The setting
returns to the previous value.
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/
IP - IP ADDRESS
Subnet Mask* Sets the printer’s subnet mask address.
Range: 0–255 for each xxx triplet
Default: 255.255.0.0
"
If the specified subnet mask address is outside of
the allowable range, the value is not changed, even
after the Apply button is clicked. The setting
returns to the previous value.
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/
IP - SUBNET MASK
Item Description