Konica Minolta magicolor 7450II - Manual (Page 225)

Network Printing 205
8
Specify the folder containing the driver for a 64-bit operating system.
A dialog box appears, requesting the location of the setup information file.
9
Click Browse, and then select the setup information file (ntprint.inf) on the
client computer mapped as a network drive.
"
This setting is available for only PostScript driver.
– Specify the file at the following path.
z:\Windows\System32\DriverStore\FileRepository\ntprint.inf_xxx
– In the path mentioned above, “z” indicates the mapped network
drive. In addition, the characters indicated by “_xxx” at the end
may differ depending on the driver version.
– Depending on the client computer being used, the setup informa-
tion file may be stored in a different location. If there is a folder
named “amd64” at the same level as “ntprint.inf”, specify the setup
information file for a 64-bit operating system located within that
folder. In addition, if the driver for a 32-bit operating system is to be
installed, specify the setup information file in the folder named
“i386” at the same level as “ntprint.inf”.
10
Click Open.
The installation begins.
11
After the installation is completed, click Close.
This completes the installation of the driver for a 64-bit operating system
onto the print server (32 bits).