Konica Minolta Magicolor 2550 - Manual (Page 124)

Ethernet Menu 108
Default Router
Subnet Mask
Enable HTTP
Enable Auto IP
Purpose Sets the address of the router/gateway if a router/gateway
is used on your network and you allow users outside your
network environment to print on your printer.
Range 0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between trip-
lets.
Default 000.000.000.000
Purpose Sets the subnet mask value of the network. The subnet
mask allows you to limit access to your printer (for exam-
ple, according to departmental divisions).
Range 0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between trip-
lets.
Default 000.000.000.000
Purpose Specify whether or not HTTP is used.
Range YES
NO
Default YES
Purpose Select whether or not the IP address is automatically
acquired when DHCP/BOOTP and PING, ARP are not
functioning or when there is no response.
Range YES
NO
Default NO