Konica Minolta Magicolor 2550 - Manual (Page 111)

Printing With NetWare 95
– Ethernet Frame Type:
Select Auto. (Select the frame type according to the network envi-
ronment.)
– Operating Mode: Select Print Server.
– Print Server Name:
Specify the print server name created in step 4.
– Print Server Password:
Specify only when setting from the NetWare server.
– Print Server Mode: Select Both.
– Preferred File Server:
Specify the name of the file server that connects to the Pserver.
– Print Server Polling Rate: Specify 1. (Change as necessary.)
7
Restart the printer (turn the printer off, then on again).
8
Use the NetWare server console to load MONITOR.NLM.
9
Select the connection information and, in the active connection column,
check that the created Pserver is connected.
For NetWare 4.x Remote Printer Mode (NDS)
1
Log on to NetWare as an administrator from a client computer.
2
Start up NWadmin.
3
Select either the organization or organizational unit container that offers
the print service, and then click Print Services Quick Setup on the Tools
menu.
4
Enter the appropriate names in the Printer Server Name, Printer Name,
Print Queue Name, and Print Queue Volume fields, select Other/
Unknown from the Printer type field, and then save the specified set-
tings.
"
For queue user privileges, printer notification option, assignment of
multiple queues, and passwords, refer to the NetWare documentation,
and specify settings as necessary.