Konica Minolta Magicolor 2550 - Manual (Page 109)

Printing With NetWare 93
7
In Administrator mode of PageScope Web Connection, select
NetWare (IPX/SPX) from the Network tab, and then specify the following
settings.
– Enable NetWare: Checked
– Ethernet Frame Type:
Select Auto. (Select the frame type according to the network envi-
ronment.)
– Operating Mode: Select Remote Printer.
– Print Server Name: Specify print server name created in step 4.
– Printer Number:
Specify the printer number (0-254).
8
Restart the printer (turn the printer off, then on again).
9
Use the NetWare server console to display the print server screen, and
then check that the created printer is shown as Waiting for Job for the
connected printer (0).