Using the network menu options, Tcp/ip, Using the network menu options 106 – Konica Minolta magicolor 5550 User Manual
Page 124: Tcp/ip 106, Ethernet menu 106 using the network menu options
Ethernet Menu
106
Using the Network Menu Options
If the printer is connected to a network, the following settings should be spec-
ified. For details about each setting, contact your network administrator.
"
When manually setting the IP address, Subnet Mask, and Gateway
turn off DHCP first.
TCP/IP
ENABLE
IP ADDRESS
SUBNET MASK
Purpose
Enables or disables TCP/IP.
If YES is selected, TCP/IP is enabled.
If NO is selected, TCP/IP is disabled.
Options
YES
NO
Default
YES
Purpose
Sets the IP address of this printer on the network.
Range
0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between trip-
lets.
Default
000.000.000.000
Purpose
Sets the subnet mask value of the network. The subnet
mask allows you to limit access to your printer (for exam-
ple, according to departmental divisions).
Range
0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between trip-
lets.
Default
000.000.000.000