Konica Minolta Magicolor 5440 DL - Manual (Page 41)

Configuration Menu Overview 31
Consumable Usage Menu
Direct Print Menu
These settings are overridden by any settings configured within the digital
camera.
For details on direct printing, refer to “Direct Print” on page 33.
!"
When using direct printing, the optional Camera Direct Photo Print
Card must be installed. For details on installing the Camera Direct
Photo Print Card, refer to the Installation Manual included with the
Camera Direct Photo Print Card. To purchase the Camera Direct
Photo Print Card, contact your local vendor or visit printer.konicami-
nolta.com.
!"
All factory default values are shown in bold.
BLACK
TONER The approximate percentage of toner remaining in the black
toner cartridge.
CYAN
TONER The approximate percentage of toner remaining in the cyan
toner cartridge.
YELLOW
TONER The approximate percentage of toner remaining in the yellow
toner cartridge.
MAGENTA
TONER The approximate percentage of toner remaining in the
magenta toner cartridge.
IMAGE
QUALITY Settings DRAFT / NORMAL / FINE
Specifies the resolution of the printed image. There are three
settings:
DRAFT (600 × 600 dpi), NORMAL (1200 × 600 dpi),
and FINE (2400 × 600 dpi).
FINE (2400 × 600 dpi) is available if additional memory of
64 MB or more is installed.
PAPER
SIZE Settings LETTER / A4 / A5 / STATEMENT /
J-POSTCARD / LTR 2UP SPL /
A4 4UP SPL
Specifies the media size on which the image will be printed.
LETTER is the default setting for the Americas, and A4 is the
default setting for all other regions.
With the selection of either of the SPL settings, the MEDIA
TYPE = GLOSSY and LAYOUT = n-UP will be overriden.