Konica Minolta Magicolor 5440 DL - Manual (Page 138)

Status, Error, and Service Messages 128
Error Messages (Warning)
Note
If an error message ( TONER EMPTY , TRANSFER END , etc.) appears,
print out the configuration page, and then check the status of the other
consumables. For details on printing the configuration page, refer to
“Printing the Configuration Page” on page 96.
This message... means... do this...
FUSER LIFE END The fuser unit has
reached the end of its
life. Contact Technical Sup-
port with the error infor-
mation.
FUSER LIFE LOW The fuser unit is near
the end of its life. If necessary, contact
Technical Support with
the error information.
INCORRECT CART.
X The X toner cartridge
is an unapproved
type. Install a
KONICA MINOLTA toner
cartridge of the appropri-
ate type (AM, EU, AP or
JP), see page 67.
SIZE MISMATCH A media size mis-
match occurs when
AUTO CONTINUE
(Engine menu) is set
to
ON .
Load the correct media
size.
TONER EMPTY
X The X toner cartridge
is empty.
(Appears when
ENGINE/TONER
EMPTY CONTINUE
is set)
Replace the toner car-
tridge.
X TONER LOW The X toner cartridge
is low and should be
replaced within 200
pages at 5% cover-
age of letter/A4
pages. Prepare the specified
color toner cartridge.