Konica Minolta Magicolor 5440 DL - Manual (Page 39)

Configuration Menu Overview 29
Network Menu
If the printer is connected to a network, the following settings should be spec-
ified. For details about each setting, contact your network administrator.
!"
All factory default values are shown in bold.
DHCP Settings DHCP SET:ON
BOOTP SET:OFF
DHCP SET:OFF
BOOTP SET:ON
DHCP SET:OFF
BOOTP SET:OFF
If there is a DHCP server on the network, specifies whether
the IP address is automatically assigned by the DHCP server
and other network information is loaded.
BOOTP Specifies whether the IP address is automatically assigned by
BOOTP and other network information is loaded.
IP
ADDRESS Setting 192.168.1.2
Sets the IP address of this printer on the network. Use the Up,
Down, Left, and Right keys to enter the value.
When manually setting the IP address, first set DHCP and
BOOTP to
OFF .
SUBNET
MASK Setting 255.255.255.0
Sets the subnet mask value of the network. Use the Up,
Down, Left, and Right keys to enter the value. When manually
setting the Subnet Mask, first set DHCP and BOOTP to
OFF .
GATEWAY Setting 192.168.1.1
If a router is used on the network, enter the IP address of the
router. Use the Up, Down, Left, and Right keys to enter the
value. When manually setting the Gateway, first set DHCP
and BOOTP to
OFF .
MAC
ADDRESS Displays the Ethernet hardware address for this printer. (It
cannot be changed.)
HTTP Settings ON / OFF
HTTP can be set to ON or OFF . ON enables the Internal Web
Page inside the printer, OFF disables it.