Avaya T3 (IP) Compact - Manual (Page 101)

101
Customizing the telephone
IP-specific settings
Registering a CTI application*
In order to control your telephone using a CTI application (e.g. Avaya Com4Tel), the
CTI application must first be registered:
Press the "Menu" function key.
Scroll to the Security menu item.
Confirm your selection.
Scroll to the CTI application menu item.
Confirm your selection.
Scroll to the Login mode menu item.
Confirm your selection.
... Enter PIN. The factory setting is "0000".
Confirm the input.
Login mode is now activated for one minute. You must start the CTI application (e.g.
Avaya Com4Tel) on the PC during this time. After successful registration, login mode
is immediately ended and the message "CTI application registered" is displayed.
i
Note
• You can only register a CTI application if your system administrator has enabled
this function.
• You can only log in a CTI application while your telephone is logged out
• If you wish to register a CTI application on a different PC on your telephone, you
must first select "CTI log out" from the "CTI application" menu and enter the PIN.
You can then register the CTI application on the other PC under "Login mode" (see
operating procedure above).