Konica Minolta 7145 - Manual (Page 16)

Protect Data in the Document Folder from Access and Tampering (continued)
- 10 -
6.
Enter the password.
Touch Password to display the Data Entry Screen.
Use the control panel keypad to enter the password without touching
Password, if it consists of numbers only
Use the touch screen keypad and control panel keypad to enter the password (8
alphanumerical characters), and touch OK.
• Alphanumerical characters are case sensitive.
• If a wrong password or fewer than 8 alphanumerical characters are entered
and the OK key is touched, the warning message "Password does not
match" will appear, and no key will work for five seconds. Enter the correct
user ID after five seconds.
• A password made up of one repeated character will not be accepted.
• If authentication fails, the information will be saved in the audit log.
• User Boxes for which only a password has been set and the System Box for
which a password has been set will be administered according to the above
specifications in Enhanced Security mode.
Touch OK on the Password Entry Screen.
Regarding subsequent operations for saving data in a User Box and data output, see the
instruction manual for the Document Folder.