3 installation procedure – Konica Minolta PS5000C MKII User Manual
Page 29
Chapter 3 PS5000C MKII Twain Driver
3-3
1.3
Installation procedure
The following procedure shows the driver installation for Windows Vista.
Administrative rights are needed for the driver installation.
Note: Screens may differ slightly depending on the Windows version.
1
Check that the power switches of the Scanner and the personal computer are
turned off.
NOTE !
Turn on the power switch of the Scanner after installing the Driver.
2
Connect the Scanner to the personal computer with the USB Cable.
3
Turn on the power switch of the personal computer, and start Windows.
NOTE !
Do not turn the power switch of the Scanner ON at this time.
4
Load the installation CD-ROM in the CD-ROM drive of the Personal
Computer. The Auto Play screen appears automatically. Click “Run
launcher.exe”.
NOTE !
When the "Auto Play" function of the computer is “OFF”, this screen
will not be displayed. Please execute “launcher.exe” in the CD-ROM
and start.
5
When the installation screen appears, click “PS5000C MKII Ver.*.*.*.*” to
begin driver installation.