Konica Minolta bizhub 750 - Manual (Page 73)

2 Administrator Operations
2-54 750/600
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
– Touch [Cancel] to go back to the HDD Setting screen.
5
Touch [OK].
? What happens if the HDD Lock Password entered does not meet
the requirements of Password Rules?
% If the HDD Lock Password entered does not comply with the Pass-
word Rules, a message appears that tells that the HDD Lock Pass-
word entered cannot be used. Enter the correct HDD Lock
Password. For details of Password Rules, see “Password Rules” on
page 1-11.
% To change the HDD Lock Password, see “Changing the HDD Lock
Password” on page 2-56.
6
To prevent entry of a wrong password, enter the 20-digit HDD Lock
Password once again.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the HDD Setting screen.
7
Touch [OK].
? What happens if there is a mismatch in the HDD Lock Passwords?
% If there is a mismatch in the HDD Lock Passwords, a message ap-
pears that tells that there is a mismatch in the HDD Lock Pass-
words. Perform steps 4 and 5 once again.
600_security_E.book 54 ページ ２００６年１２月２７日 水曜日 午前７時５０分