Konica Minolta bizhub 750 User Manual
Page 32
Administrator Operations
2
750/600
2-13
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
–
The following screen appears if the previously required settings are
yet to be made by the Administrator of the machine. Make the nec-
essary settings according to the corresponding set procedure.
–
The following screen appears if the previously required settings are
yet to be made by the Service Engineer. Consult the Service Rep-
resentative.
?
What is the factory setting for the Enhanced Security mode?
%
The Enhanced Security mode is factory-set to [OFF]. Be sure to turn
[ON] the Enhanced Security mode so as to enable the security func-
tion of the machine.
5
Touch [OK].
600_security_E.book 13 ページ ２００６年１２月２７日 水曜日 午前７時５０分
This manual is related to the following products: