beautypg.com

Bradmin light utility (for mac os x users), For network users – Konica Minolta bizhub 20P User Manual

Page 21

background image

21

For Network Users

BRAdmin Light utility (For Mac OS X users)

The BRAdmin Light is a utility for initial setup of KONICA MINOLTA network connected devices. It can also search
for KONICA MINOLTA products on your network, view the status and configure basic network settings, such as
IP Address from a computer running Mac OS X 10.3.9 or greater.
The BRAdmin Light software will be installed automatically when you install the printer driver. If you have already
installed the printer driver, you don’t have to install it again.

Set your IP Address, Subnet Mask

and Gateway using BRAdmin Light

a

Double-click the Macintosh HD icon on your
desktop.


b

Choose Library, Printers, KONICA MINOLTA
and then Utilities.

c

Double click the file BRAdmin Light.jar and
run the software. BRAdmin Light will then
search for new devices automatically.

d

Double-click the unconfigured device.

e

Choose STATIC for the Boot Method. Enter
the IP Address, Subnet Mask and Gateway,
and then click OK.

f

The address information will be saved to the
printer.

Note

• If you have a DHCP/BOOTP/RARP server in

your network, you don’t have to do the
following operation. The print server will
automatically obtain its own IP Address.

• Make sure that version 1.4.2 or later of Java

client software is installed on your computer.

• The default password for the print server is

access’. You can use BRAdmin Light to
change this password.