Konica Minolta bizhub 20P - Manual (Page 11)

11
Macintosh USB
W
indows
®
Ma
cintosh
USB
For USB Interface Cable Users
6 Connect the printer to
your Macintosh and
install the driver
a
Remove the label covering the USB interface
connector.
b
Connect the USB cable to the USB connector
marked with a
symbol, and then connect
the cable to your Macintosh.
c
Make sure the printer power switch is on.
d
Turn on your Macintosh. Put the supplied
CD/DVD-ROM into your CD/DVD-ROM drive.
e
Double-click your printer name icon on your
desktop. Double-click the Start Here icon.
Follow the on-screen instructions.
f
The KONICA MINOLTA software will search
for the KONICA MINOLTA printer. During this
time the following screen will appear.
g
Choose the printer you wish to connect, and
then click OK.
h
When this screen appears, click OK
IMPORTANT
DO NOT connect the printer to a USB port on
a keyboard or a non-powered USB hub.
Finish
The installation is now
complete.