Konica Minolta bizhub PRO 950 - Manual (Page 45)

Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) 4
bizhub PRO 950 4-13
The “Printer” list appears.
17
Click the [Next].
18
Follow the on-screen instructions.
– If the “User Account Control” window appears, click the [Continue].
19
Click the [Finish].
20
When the installation is completed, make sure that the icon of the in-
stalled printer appears in the Printers window.
21
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
4.2.4 Local connection
When this machine is connected via a USB port, the printer driver can be in-
stalled with plug-and-play.
1
Connect the copier to a computer using a USB cable, and then start up
the computer.
2
Turn on the main power of the copier.
– The Found New Hardware Wizard dialog box appears.
– If the Found New Hardware Wizard dialog box does not appear,
turn off the copier, then on again.
– When turning off the power, then on again, wait at least 10 seconds
before turning it on again. Otherwise, this machine may not function
properly.
3
Set the “Driver CD or PS Driver CD” in the CD-ROM drive.
4
Click “Locate and install the driver software (recommended)”.
– If the Windows connect to Windows Update dialog box appears,
select “NO”.
5
From “Search for the best driver in these locations,” select “Include this
location in the search”, and then click the [Browse].
6
Specify the desired folder on the Driver CD or PS Driver CD that con-
tains the printer driver, and then click the [Open].
– Select printer driver (PCL, PostScript PPD) to be used.