Konica Minolta bizhub PRO 950 - Manual (Page 216)

PostScript PPD Printer Driver setting (Windows) 9
bizhub PRO 950 9-31
Wait Mode
Outputs the test print and checks the current setting from the control panel
of copier. Use this when printing a large volume document, such as multiple
sets of pages.
1
Open the file to be printed and select [File] - [Print] of application.
2
Click [Preferences] to open the
[Printing Preferences] window and
then click [Advanced].
3
Click [
▼] besides the [Wait Mode] to display the list. Then select [Wait
Mode] or [Proof and Print] and click [OK] to close the [Advanced Op-
tions] window.
– Select [Wait Mode] to wait before printing the document to check
the current setting from the control panel of copier.
– Select [Proof and Print] to print the one copy as a test to check the
output and the current setting from the control panel of copier.
4
Click [OK] to close the [Printing Preferences].
5
Click [Print] to perform printing from the application.
– When the [Wait Mode] is selected, it stops without being printed.
– When the [Proof and Print] is selected, only one set is printed and it
stops.
On the copier's control panel, the Mode Check screen appears.
6
In case of [Proof and Print], [MACHINE] tab blinks on the right above
the copier touch panel screen. Press [MACHINE] tab.
Mode Check screen appears on the control panel of copier.