Konica Minolta bizhub PRO 950 - Manual (Page 215)

PostScript PPD Printer Driver setting (Windows) 9
bizhub PRO 950 9-30
Back Cover Tray
Specifies the paper tray for the back cover.
PI Front Cover Tray
Sets a front cover for which the paper is from the [PI Tray 1] or [PI Tray 2].
The [PI Front Cover] cannot be set in the following cases:
-
When the [Cover Sheet Feeder] is not selected in the [Device Settings]
tab - [Installable Options]
- When any item other than [Off] is selected for the [Fold].
PI Back Cover Tray
Sets a back cover for which the paper is from the [PI Tray 1] or [PI Tray 2].
The [PI Back Cover] cannot be set in the following cases:
-
When the [Cover Sheet Feeder] is not selected in the [Device Settings]
tab - [Installable Options]
- When any item other than [Off] is selected for the [Fold].
Transparency Interleave
Set this item when using the transparency interleave as the paper.
Select either [Print] or [Blank].
The [Transparency Interleave] cannot be set in the following cases:
-
When the [Fine] is not selected in the [Paper/Quality] tab - [Media]
- When the [92-105g/m
2
] is not selected in the [Advanced Options] - [Paper
Weight]
Interleave Tray
Uses to select the paper tray for Transparency Interleave.
Paper Tray (Transparency Interleave) cannot be set in the following cases:
-
When the [Paper Sources] is not selected in the [Device Settings] tab -
[Installable Options]
Print This is set when inserting the printed interleaf for the
transparent sheet.
Blank This is set when inserting the blank interleaf for the trans-
parent sheet.