Konica Minolta bizhub PRO 950 - Manual (Page 309)

Appendix 14
bizhub PRO 950 14-7
Example Using OpenOffice or using Star Suite
0 Paper sizes supported by the bizhub PRO 950 may not be displayed
when the OpenOffice is being used. In such a case, follow the procedure
given below. However, the procedure described here is applicable when
the OpenOffice 1.0.2 is used on the RedHat9 and the procedure and op-
eration given below may vary according to the version of an OS used.
1
From the main menu, select [Of-
fice], then [OpenOffice.org
Printer Setup].
The printer Administration dia-
log box appears.
2
Click [New Printer].
The Add Printer dialog box ap-
pears.
3
Check that Add a printer is se-
lected, and then click [Next].
– Depending on the applica-
tion that is used, the button
may be displayed in gray-
ing-out.
The printer selection list ap-
pears.
4
Click [Import].
Driver Installation dialog box appears.
5
Enter /usr/share/cups/model/ in the driver directory and then click
[Browse].
6
Click [Select] from Select path windows.
7
In the Selection of drivers list, select “KONICA MINOLTA 950 OpenOf-
fice PPD”.