Konica Minolta pagepro 5650 - Manual (Page 58)

Configuration Menu Overview 48
FIN-
ISHING
Settings
SUB TRAY/MAIN TRAY/OFFSET
When SUB TRAY is selected, the paper is fed to the sub output
tray.
When MAIN TRAY is selected, the paper is fed to the main out-
put tray.
When OFFSET is selected, the paper is fed to the sub output tray
with each copy slightly shifted.
The setting specified in the printer driver will override this menu
setting.
"
The paper size available for SUB TRAY or OFFSET is as
follows:
Width:
89 to 216 mm ( 3.5 to 8.5 inches )
Length: 140 to 356 mm ( 5.5 to 14.0 inches )
"
OFFSET can be set only when COLLATE is ON .
JOB
SEPA-
RATION
Settings
ON/OFF
The paper is fed to the sub output tray with each print job slightly
shifted.
"
If FINISHING is set to MAIN TRAY , the print jobs are fed
out stacked on the top of each other without being shifted.