Konica Minolta magicolor 8650 - Manual (Page 62)

8650 2-47
Administrator Operations 2
0 For the procedure to call the Admin Mode to the display, see "Accessing the Admin. Settings" on
page 2-2 .
1
Start PageScope Web Connection and access the Admin Mode.
2
Click the [Network] tab.
3
Click the [SNMP Setting] menu.
4
Enter the auth-password and priv-password in the boxes marked by the rectangle, that is, the Write
side SNMP v3 Setting.
5
Click the [OK].
? What happens if the auth-password and priv-password entered does not meet the requirements of
Password Rules?
% If the auth-password and priv-password entered does not comply with the Password Rules, a
message appears that tells that the auth-password and priv-password entered cannot be used.
Enter the correct auth-password and priv-password. For details of Password Rules, see
"Password
Rules" on page 1-8 .