Konica Minolta magicolor 8650 - Manual (Page 30)

8650 2-15
Administrator Operations 2
2.5 Canceling the Operation Prohibited State
When access to the Administrator of the machine by the Admin. Settings via the control panel is
authenticated, the machine enables the operation of Release Setting performed for canceling the state of
ProhibitFunctions (access lock state) as a result of unauthorized access.
Release Setting clears the unauthorized access check count for all SNMP authentication, all Secure Print
authentication, and all Public User Box authentication, resetting it to zero.
Perform the following procedure to cancel the password entry prohibited state.
- Admin. Settings: The operation prohibited state is canceled by the Service Engineer, or after the lapse
of a predetermined period of time after the main power switch is turned off and on
- Secure Print authentication: Release
- Public User Box authentication: Release
- SNMP authentication: Release
2.5.1 Performing Release Setting
2
Note
When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after
turning it off. if there is no wait period between turning the main power switch off, then on again, the
machine may not function properly.
Do not leave the machine with the setting screen of Admin. Settings left shown on the display. If it is
absolutely necessary to leave the machine, be sure first to log off from the Admin. Settings.
0 For the procedure to call the ProhibitFunctions menu to the display, see steps 1 through 5 of "Setting
ProhibitFunctions" on page 2-12 .
1
Call the ProhibitFunctions to the screen from the control panel.
2
Press the [,] key to select [Release].
3
Press the [Menu/Select] or [)] key.
4
Press the [+] and/or [,] key to select the function, for which the state of Prohibit Setting (access lock
state) as a result of unauthorized access is to be canceled.
5
Press the [Menu/Select] key.
This clears the unauthorized access check count for the selected function, resetting it to zero.