4 initial settings of this machine, Checking a lan cable for connection, Assigning an ip address – Konica Minolta bizhub C3100P User Manual
Page 35: Initial settings of this machine, 4initial settings of this machine
bizhub C3100P
4-3
4.1
Preparation for network connection (for administrators)
4
4
Initial Settings of This Machine
4.1
Preparation for network connection (for administrators)
Checking a LAN cable for connection
Check that a LAN cable connected to the network is connected to the LAN port of this machine.
For details on the cable connection port, refer to page 2-4.
Assigning an IP address
If this machine has a fixed IP address, manually enter the IP address, subnet mask, and default gateway ad-
dress.
In the Control Panel, select Menu/Select - [ADMIN SETTINGS] - [EXPERT ADJUSTMENT] - [ETHERNET] -
[TCP/IP] - [IPV4 SETTINGS], then configure the following settings.
Tips
-
To check the IP address assigned to this machine, print out the Configuration Page. To print out the
Configuration Page, select Menu/Select - [PRINT REPORTS] - [CONFIGURATION PG].
Settings
Description
[IP ADDRESS]
When manually specifying the IP address, enter the fixed IP address assigned
to the machine.
[SUBNET MASK]
When manually specifying the IP address, enter the subnet mask.
[DEFAULT GATEWAY]
When manually specifying the IP address, enter the default gateway.
[IP APPLICATION]
When automatically specifying the IP address, select the method for automatic
retrieval.
•
[DHCP]: [ON] is specified by default.
•
[BOOTP]: [OFF] is specified by default.
•
[ARP/PING]: [OFF] is specified by default.
•
[AUTO IP SETTINGS]: Fixed to [ENABLE].