Konica Minolta bizhub C3100P - Manual (Page 31)

bizhub C3100P 3-9
3.3 Loading paper into Tray 1 3
4
Load paper into the tray with the print side facing up.
% Load a postcard or reply postal card, turning the short side to the right-hand side of the tray.
NOTICE
Do not load the sheets up to the point where the top of the stack is higher than the , mark.
If paper is curled, flatten it before loading.
5
Align the paper guide to the paper size.
6
Close Tray 1.
7
Change the paper type and paper size on the Control Panel. When loading custom sized paper, also
specify the paper size.
% To configure settings: Menu/Select - [PAPER MENU] - [PAPER SOURCE] - [TRAY 1]