Konica Minolta bizhub C3100P - Manual (Page 18)

2-8 bizhub C3100P
About power supply 2 2.2
2.2.3 Using the Power key
Press the Power key to switch this machine to Power Save mode.
When the Power key is pressed, the status of this machine changes as shown below. Depending on how
long the Power key is pressed, the state of the power saving mode to be activated will differ.
Tips
If this machine is switched to Sleep mode in factory settings, it automatically shifts to Deep Sleep mode that
reduces power consumption further than when in Sleep mode.
However, this machine cannot be shifted to Deep Sleep mode if:
- An optional i-Option LK-111 is employed and the ThinPrint function is enabled.
- An optional Authentication Unit AU-201 is connected.
Related setting (for the administrator)
When this machine is in Sleep mode, you can select whether or not to shift to Deep Sleep mode that reduces
power consumption further than when in Sleep mode.
To configure settings: Menu/Select - [ADMIN SETTINGS] - [SYSTEM SETTINGS] - [POWER SUPPLY] -
[CONSUMPTION] (Default: [ENABLED])
Power key Status of
this ma-
chine Status of
LED Print Description
Short press Sleep Flash: Blue Enable Turns off the backlight of the Message
Window to reduce power consumption.
The indicator at the top of the Message
Window lights up blue.
If a print job is received, it is printed
while Sleep mode is kept in the active
state.
When the user operates the Control
Panel or this machine receives print
jobs, the machine returns to Normal
mode.
Deep Sleep Flash: Blue Enable Reduces power consumption further
than when in Sleep mode.
The display of the Message Window is
turned off completely.
If a print job is received, this machine
shifts to Sleep mode to execute the
print job, then returns to Deep Sleep
mode.
The time required to return to Normal
mode is longer than that required to re-
turn from Sleep mode.
To return the machine from Deep Sleep
mode to Normal mode, press the Pow-
er key again.
Hold down ErP Auto
Power OFF Flash:
Orange Disable This function provides a more signifi-
cant power saving effect than Deep
Sleep mode, which is close to the state
where the main power is turned off.
To enable the machine to return to Nor-
mal mode from the ErP Auto Power OFF
status, press the Power key again.