Konica Minolta Magicolor 5450 - Manual (Page 223)

Configuring the Printer 207
Default Gateway* If a router is used on the network, sets the router’s
address.
Range: 0–255 for each xxx triplet
Default: 0.0.0.0
"
If the specified router address is outside of the
allowable range, the value is not changed, even
after the Apply button is clicked. The setting
returns to the previous value.
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/
IP - DEFAULT GATEWAY
RAW Port
Number Identifies the number of the printer’s RAW port.
Choices: 1 - 65535
Default: 9100
Host Name Specifies the host name.
Default: magicolor5450
Domain Name Specifies the domain name.
Default: [Blank]
DNS Server Specifies the DNS server. Up to three can be registered.
Default: 0.0.0.0
Dynamic DNS Select whether or not Dynamic DNS is used.
Choices: Enable, Disable
Default: Disable
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Log out button Logs out of Administrator Mode and returns to User
Mode.
* Always enter these addresses without leading zeros. For example,
131.011.010.001 should be entered as 131.11.10.1.
Item Description