Konica Minolta Magicolor 5450 - Manual (Page 101)

Specifying Printer Driver Settings 85
Options Installed
Simulation Profile
Parameters Settings
Printer Memory Select 256 MB, 512 MB, 768 MB, or
1024 MB if the optional memory for the
printer has been installed.
„ The default setting is 256 MB.
Duplex Unit Select Enable if the optional duplexing unit
for the printer has been installed.
„ The default setting is Disable.
Hard Disk Select Enable if the optional Hard Disk for
the printer has been installed.
„ The default setting is Disable.
Paper Source Unit Select Unit 3 or Unit 3 + Unit 4 if the optional
trays for the printer have been installed.
„ The default setting is Disable.
Parameters Settings
Simulation Gray Treatment Specifies simulation gray treatment as Com-
posite Black, Black and Gray, or Black
Only.
„ The default setting is Composite Black.
Match Paper Color Specifies the Match Paper Color.
„ The default setting is OFF.
Simulation Profile Specifies the simulation profile as None,
SWOP, Euroscale, Commercial Press, DIC,
or TOYO.
„ The default setting is None.