2 requests to the administrator, Requests to the administrator – Konica Minolta BIZHUB C360 User Manual
Page 15
Security Function Ver. 1.02 Jul. 2010
7. Enhancing the security function
11
bizhub C360/C280/C220
for PKI Card System
Security Function
7.2.2
Requests to the administrator
• The administrator must perform or check the following settings.
NOTE
• If the administrator of the machine registers a new Encryption Key be sure first to
perform [Physical Format] by accessing [Service Mode]
[State Confirmation]
[HDD Format].
Item
Setting/Check
Default Setting
Administrator Password
Check that the password meets the requirements
of the Password Rules.
1234567812345678
Encryption Key
Setting of encryption key.
No setting
User Authentication
Check that “External Server (Active Directory
only)” is set.
Not authenticated
Prohibit Functions When
Auth. Error
Check that Prohibited Functions When Authenti-
cation Error has been set to [Mode2] by the
administrator of the machine.
Mode 1
PSWC Settings
Check that “OFF” is set.
ON
OpenAPI Access Setting
Check that “Restrict” is set.
Allow
TCP Socket
Check that “OFF” is set.
ON
FTP Server Setting
Check that “OFF” is set.
ON
SNMP v1/v2c Setting
Check that Write setting is set to “Invalid”.
Valid
SNMP v3(IP)
Check that “OFF” is set.
ON