Konica Minolta bizhub C10 - Manual (Page 69)

Group Dialing 63
3
Check that the GROUP DIAL screen appears, and then press the Menu
Select key.
4
Press the one-touch dial key that you want to change or delete.
5
Press the Cancel/C key.
6
Using the * and ) keys, select either “EDIT” or “DELETE”, and then
press the Menu Select key.
"
If “EDIT” was selected, the group name is displayed. Continue with
step 7.
"
If “DELETE” was selected, the group dialing settings are deleted and
the message “SELECT REGIST.KEY” appears again. Skip to step 10.
7
If you want to change the name of the group, enter the new name, and
then press the Menu Select key.
"
For details on editing text, refer to “Entering Text” on page 79.
8
To delete the displayed recipient, press the Cancel/C key.
"
To keep the displayed recipient, press the Menu Select key.
9
When you are finished making changes, press the Start key.
The entered information is programmed with the one-touch dial key, and
the message “SELECT REGIST.KEY” appears.
10
To change or to delete other group dialing, press the one-touch dial key,
and then repeat the procedure starting from step 5.
"
To finish the procedure and return to the Fax mode screen, continue
pressing the Cancel/C key until the Fax mode screen is displayed.