Konica Minolta bizhub C10 - Manual (Page 66)

Speed Dialing 60
6
Using the keypad, enter the fax number of the recipient and then press
the Menu Select key.
"
The fax number can contain a maximum of 50 characters.
"
For details on entering/editing numbers, refer to “Entering Text” on
page 79.
"
To cancel programming, press the Cancel/C key. (To cancel program-
ming while the number is being entered, press the Menu Select key,
and then press the Cancel/C key.)
7
Select the modem speed, and then press the Menu/Select key.
The entered information is registered with the speed dial number, and
then the speed dial input screen appears.
"
If a transmission error occurs, select 14.4 or 9.6 for the modem speed.
8
To program another speed dial number, enter the speed dial number, and
then repeat the procedure starting from step 4.
"
To finish the procedure and return to the Fax mode screen, continue
pressing the Cancel/C key until the Fax mode screen is displayed.
Changing/Deleting Speed Dial Information
The registered speed dial information can be corrected.
1
Press the Menu Select key, then the , key three times.
2
Check that the FAX REGISTRATION screen appears, then press the
Menu Select key, and then press the , key.
3
Check that the SPEED DIAL screen appears, and then press the Menu
Select key.
4
Using the keypad, enter the speed dial number that you want to change or
delete.
5
Press the Cancel /C key.
6
Using the * and ) keys, select either “EDIT” or “DELETE”, and then
press the Menu Select key.
"
If “EDIT” was selected, the name is displayed. Continue with step 7.
"
If “DELETE” was selected, the settings programmed for the speed dial
number are deleted and the speed dial input screen appears again.
Skip to step 9.
"
If a speed dial number used in group dialing is deleted, it is also
deleted from the corresponding group dialing.