Konica Minolta bizhub C10 - Manual (Page 24)

Configuration Menu 18
MACHINE SETTING
1.AUTO PANEL
RESET
For details on specifying settings, refer to the Printer/
Copier/Scanner User’s Guide.
2.ENERGY SAVE
MODE
3.LCD CON-
TRAST
4.LANGUAGE
5.LAMP OFF
TIME
6.BUZZER VOL-
UME
Settings
HIGH / LOW / OFF
Select the volume of alarms and the beep that sounds
when a key is pressed.
7.INITIAL
MODE
Settings
COPY / FAX
Select the mode that the machine starts up in or returns
to after the automatic reset.
8.TONER EMPTY
STOP
Settings
ON / ON(FAX) / OFF
Select whether or not printing stops when the toner has
run out.
If a fax is received while printing stopped, the received
fax is saved in memory and automatically printed after
the error is corrected.
„ ON : All printing stops when the machine has
detected that the toner has run out.
„ ON (FAX) : Only fax printing stops when the
machine has detected that the toner has run out,
and a message appears in the message window.
„ OFF : Printing does not stop when the machine has
detected that the toner has run out, and a message
appears in the message window.
9.TONER NEAR
EMPTY
For details on specifying settings, refer to the Printer/
Copier/Scanner User’s Guide.
10.AUTO CON-
TINUE
Settings
ON / OFF
Select whether or not to perform image stabilization. If
ON
is selected, image stabilization is started.
11.CALIBRA-
TION
For details on specifying settings, refer to the Printer/
Copier/Scanner User’s Guide.
12.REMOTE
MONITOR
For details on specifying settings, refer to the Printer/
Copier/Scanner User’s Guide.