Konica Minolta bizhub PRESS C1100 - Manual (Page 55)

bizhub PRESS C1100/C1085 2-47
2.4 User Authentication in Enhanced Security Mode
2
4
Press [User Name], then enter the user name specified with the password to be changed.
Press [OK].
5
Press [Current Password], and then enter the current password corresponding to the user name en-
tered in step 4.
Press [OK].
The entered password is displayed as asterisks (********) on the screen.
% Passwords are case-sensitive.
% If a wrong password or fewer than 8 alphanumeric characters are entered and [OK] is pressed, the
warning message [Password is incorrect / Please wait for a while] is displayed, and no key will work
for five seconds. Enter the correct password after five seconds.
% The information about failed authentication is saved in the audit log.
6
Specify a new password on the Change Password Screen.
% Press [New Password], and then enter a new password for the user name entered in step 4.
% Enter 8 to 64 alphanumeric characters for the user password (the alphabetic characters are case-
sensitive).