Actiontec electronic RI408 User Manual

Page 30

Actiontec Broadband Router User Manual

Chapter 4 Using Network Connections

Configuring the Home/Office Network

Click Settings in the “Network (Home/Office) Properties” screen to generate the
“Configure Network (Home/Office)” screen.

General
The top part of the Configure Network (Home/Office) screen displays general
communication parameters. Actiontec recommends not changing the default
values in this section unless familiar with networking concepts.

Status Displays the connection status of the network.

When should this rule occur? Displays when the rule is active. To schedule rules,
see the “Advanced Settings” chapter.

Network Select the type of connection being configured from the drop-down list
(options: Broadband Connection, Network [Home/Office], or DMZ).

Connection Type Displays the type of connection.

Physical Address Displays the physical address of the network card used for the
network.

MTU

MTU (

Maximum Transmission Unit) specifies the largest packet size per-

mitted for Internet transmission. “Automatic” sets the

MTU

at 1500. Other choic-

es include “Automatic by

DHCP

,” which sets the

MTU

according to the

DHCP

connection, and “Manual,” which allows the

MTU

to be set manually.