Actiontec electronic RI408 - Manual (Page 103)

100
Actiontec Broadband Router User Manual
101
Chapter 7 Using Advanced Settings
Restoring Default Settings
If the Router’s factory default settings need to be restored (to build a new network
from the beginning, for example), use the following procedure:
1. Click Restore Defaults in the Advanced screen. The “Restore Defaults” screen
appears.
2. Click Apply to restore the Router’s factory default settings.
☞
Note: All of the Router’s settings and parameters will be restored
to their default values after performing the Restore Default pro-
cedure. This includes the administrator password; a user-speci-
fied password will no longer be valid.
Reboot the Router
To reboot the Router:
1. Click Restart in the Advanced screen. The “Restart” screen appears.
2. Click OK to restart the Router. This may take up to one minute.
To reenter the MegaControl Panel after restarting the Router, click the web brows-
er’s “Refresh” button.