Actiontec electronic RI408 - Manual (Page 21)

18
Actiontec Broadband Router User Manual
19
Chapter 3 Configuring My Network Settings
Block Internet Services
Internet services blocking is used to prevent a device on the network from access-
ing particular services on the Internet, such as receiving E-mail or downloading
from
FTP sites. To set up Internet services blocking on a networked device, locate
the device in the My Network column, then click Block Internet Services. The
“Access Control” screen appears.
1. Click Add in the “Networked computer/Device” column. The “Add Access
Control Rule” screen appears.
2. If this access control rule applies to all networked devices, select “Any” from
the “Networked Computer/Device” list box. If this rule applies to certain
devices only, select “Specify Address” and click Add. Then, add a network
object (for more details about adding network objects, see the “Advanced
Settings” chapter of this manual).
3. Select the Internet protocol to be blocked from the “Protocol” drop-down list.