Konica Minolta KIP 3100 - Manual (Page 11)

Chapter 1 Before Use 1-6
1. 4. 2 Printer
Subject Specification
Printing method
LED Array Electro photography
Photoreceptor Organic Photoconductive Drum
Print speed 80mm per second
(Metric) -
(Inch) 6 D Landscape
Print head LED Array
Resolution of print head 600dpi x 600dpi
Print width Maximum 914mm or 36”
Minimum 279mm or 11” (Roll paper)
210mm or 8.5” (Cut sheet paper)
Print length Maximum
(Standard) 6m or 19.7 feet
(Option) 24m or 75 ft
Minimum 210mm or 8.5”
Warm up time Less than 4 minutes 30 seconds
(At 23
o C, 60%RH, the rated voltage, and plain paper is used)
First print time 18 seconds (D Landscape)
(At 23
o C, 60%RH, the rated voltage, and plain paper is used)
Fusing method Heat and Pressure Rollers
Development method Dry type non-magnetic mono-component toner
Media (Recommended Media)
Plain Paper 18 - 24lbs
Tracing Paper 18 - 20lbs
Film
4 MIL
Recommend media for electro-photography process
Storage of consumables (Toner cartridge)
Store the cartridge within the temperature range from 0 to 35
degrees Centigrade (32 to 95 degrees Fahrenheit) and within the
humidity range from 35 to 85% RH.
NOTE
If the print is longer than 6m, image quality or the reliability of
paper feeding systems are not guaranteed.
NOTE
The above specifications are subject to change without notice.