Konica Minolta bizhub PRESS C1060 - Manual (Page 24)

Administrator Security Functions 2
2-16 bizhub PRESS C1070/C1070P/C1060, bizhub PRO C1060L
2.2
8
If you choose to overwrite the data, select the desired erase mode.
% Press [Mode 1] or [Mode 2]. For detailed information about how to set up and use the erase modes,
refer to the HTML User's Guide.
% If you choose not to overwrite the data, the mode selection does not make any difference.
9
Press [OK] on the Delete Temporary Data Setting Screen.
10
Turn OFF the sub power switch, and turn OFF the main power switch.
% Do not turn off the main power while the message [Cooling in progress / Power is turned off auto-
matically] is displayed.
11
Wait for more than 10 seconds.
12
Turn ON the main power switch, and turn ON the sub power switch.
2.2.4 Deleting All Data
You can choose to delete all the document data stored on HDD. When you choose to delete all the data,
select one of the 8 erase modes provided.
1
Press Utility/Counter on the control panel to display the Utility Menu Screen.
% To use this function of deleting all the data, contact your service representative.
2
Press [03 Administrator Setting].
% For bizhub PRESS C1070P, press [02 Administrator Setting].
The Administrator Password Screen is displayed.